I think Pin 1 should be -40V. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Mouton's Electronics" <moutons@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 11, 2003 4:45 PM Subject: [TechAssist] RCA M#35gt657 CTC177cc > This set came in with a bad U4101 and CR4106 was shorted. Changed both and in standby the reg B+ is up at 198vdc, set does start up but the reg. B+ is then LOW 120vdc. > I have already changed the smps transformer, C4125, C4135 and checked R4135, R4128, R4105, CR4102 and all check good. > > U4101 standby voltages > Pin 1 -35v > pin 2 -29v > pin 3 0 > pin 4 .7 > pin 5 0 > pin 6 0 > pin 7 0 > pin 8/9 0 > pin 11/12 168 > > Thanks in advance, > > Jason > Mouton's Electronics > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/