[TechAssist] Re: RCA DTV306 DM1 module needed.

  • From: Jim Myers <jr.myers@xxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 12 Jan 2007 13:31:01 -0500

250660 superseded by 250660R dealer cost $888.35 MSRP $1154.76 per 
Tritronics.

********************************
Since 1972                     *
Jim Myers                      *
Telrad Electronics             *
Fort Wayne Indiana             *
********************************


John Mielke wrote:
> I have a RCA F38310JX4 with a DTV306GCB chassis made in 2001.  I repaired
> the main power supply but it will not come on.  I determined by substitution
> that the DM1 module is bad. (luckily I had another set with the same chassis
> in the shop for repair)  Does anyone know if it is available from RCA or
> does someone rebuild it?  If so, what is the cost. Is there a part number
> for the modular other than DM1?  I removed the covers and I don't see
> anything field serviceable.  Also, when the set was working it had a very
> bad picture, like the CRT was bad.  Is there a history of bad tubes on these
> sets?  I have only serviced a couple of this model before so not real
> familiar with them. I do have the service manual.  TIA, John.
> John Mielke
> Main TV
> 636 Main St
> Longmont, Co 80501
> 303 776 6955
> 303 776 0792 fax
> www.longmontmaintv.com
> maintv2004@xxxxxxxxxxx
> 
> -----------------------------------------------------------------------------
> Remove: http://www.tech-assist.org/remove.htm
> Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 
-----------------------------------------------------------------------------
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: