[TechAssist] Re: RCA Combo T19408 Vert Sweep Help

  • From: "tvservice" <tvservice@xxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 17 Jun 2004 11:33:55 -0500

Bob,
check this
Combo TV/VCR
13TVRxxx, 19TVRxxx, T13xxx, T19408
TV TX808
Shutdown after power on @2 seconds
May have white retrace lines at top
Replace DF01 MUR160 ( diode across Vert IC IF01 pins 3-6 and possibly IF01
TA8403K

Robert
tvservice@xxxxxxxxxxxxx
H & H Electronics Inc


----- Original Message ----- 
From: "Bob@Bobs tv" <woodman1@xxxxxxxx>
To: "TechAsist M" <techassist@xxxxxxxxxxxxx>
Sent: Thursday, June 17, 2004 10:45 AM
Subject: [TechAssist] RCA Combo T19408 Vert Sweep Help


> RCA T19408/Combo
> No vert sweep, then shut down.
>           Working on this unit with no print, (before shut down) Found no
drive to the vert output TA84303K... On the main board, the set uses a
TA1268 chip pin 22 (vert drive) has a nice clean 2v p/p at turn on.. But
tracing thru the main board I can't find it anywhere else. Any help greatly
appreciated or a print of the main board.. I had the same model a few months
ago with no vert/sweep and found a small resistor in the vcc feed open..
>
> Bob,
>
> Bobs TV   Worcester, ma
>
> woodman1@xxxxxxxx
>
> Main  508-853-1482
> Fax    508-853-1480
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: