[TechAssist] Re: RCA CTC187BD2 pincusion Fixed
- From: Paul <dntwntv@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 30 Dec 2004 18:33:32 -0800 (PST)
That fixed the problem. Thanks to Mando.
Paul
armando guerra <birdie@xxxxxxxxxxxxx> wrote:
On this chasis,the most common parts that fail regarding pin. problems are
CR4403 and C4407.Hope this helps.
Mando
Birdie's TV & Electronics
Casa Grande, AZ
Paul wrote:
> Is there an adjust for pincusion on this chassis? I do not have the service
> info on this chassis. There is an apc detector adj on the ctc185 that I have.
> If this is what I am looking for what is the parameter number and value? I
> checked and it is different than ctc185. I did the tuner wrap and eeprom and
> thought it was finished till I tried to see ch. numbers. Put a cross hatch on
> it and it is really bowed on both sides.
> Paul
>
> Paul ,B
> Central TV&Video
> 911W Grand Ave
> Grover Beach Ca.
> (805)481-8084
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/
Paul ,B
Central TV&Video
911W Grand Ave
Grover Beach Ca.
(805)481-8084
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/
- References:
- [TechAssist] Re: RCA CTC187BD2 pincusion
- From: armando guerra
Other related posts:
- » [TechAssist] Re: RCA CTC187BD2 pincusion Fixed
- [TechAssist] Re: RCA CTC187BD2 pincusion
- From: armando guerra