Strange to have horizontal and vertical at the same time. You need to do to the EPROM set up, and see if you can bring them into phase. There is a Capacitor you can bridge in to keep it from going into shut down at full line voltage, but I have always found it hard to see the Parameter numbers and set up with this workaround. I would suggest to try a new EPROM before you waste too much time on it. -Ed- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx teltek@xxxxxxxxx ----- Original Message ----- From: <WWill90634@xxxxxxx> To: <Techassist@xxxxxxxxxxxxx> Sent: Friday, September 16, 2005 6:08 PM Subject: [TechAssist] RCA CTC-175A > Just in CTC175A have horizontal and vertical phase problem, running on > variac at 90 volts. If I go over 90 volts the unit will shut down.Maybe > regulation > causing phase problem. We don't have service info on this one. > Any help will be appreciated > > TIA > Will > Soundview Electronics > > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/