Scott; back when RCA was kind enough to answer questions on nesda this was addressed several times. They stated that this was the result of the crt being extra good, and is of no consiquence. For what it's worth. Walter --- Scott Farley <sfarley@xxxxxxxxxxxxx> wrote: > > Good morning, > I have a RCA 35", Model G35830WKLM2, that has a > green spot, lower left > center, when shut off or unplugged. The only way > that I can get the spot to > disappear is to either unplug the CRT Kine Board > or Remove G2 wire off Pin > 1. The spot will then fade out. I disconnect > the green Transistor and it's > still there. With power unplugged, I shorted > everything on the CRT board > and the spot is still there. I can connect High > Volt Probe to the Anode and > drain off High Volt to remove green spot also, > obviously. This spot will > remain there for hours if I don't drain off high > voltage. Any help on this > would be greatly appreciated. > TIA SCOTT > > > Midway Electronics Inc. > 1250 N McKinley Ave > Rensselaer, In. 47978 > Buis: 219-866-3716 > Fax: 219-866-7915 > Attn: (Scott-Service tech) > mailto:sfarley@xxxxxxxxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:wwood_38478@xxxxxxxxx __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.