[TechAssist] Re: Projo repairs on the floor. alternatives?
- From: "Jamie " <jandkmay@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 29 Feb 2004 13:36:43 -0800
Oops reg. price $279. Sorry
Jamie
Affordable TV Repair
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, February 29, 2004 7:06 AM
Subject: [TechAssist] Re: Projo repairs on the floor. alternatives?
> Regular price $179 sale price $199???? Offer to pay regular price.
> Al Marquardt
> ampm@xxxxxxx
> Al Marquardt Electronic Repair
> 206 W Main
> Girardville Pa. 17935
> ----- Original Message -----
> From: "Jamie " <jandkmay@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, February 29, 2004 5:10 AM
> Subject: [TechAssist] Re: Projo repairs on the floor. alternatives?
>
>
> > While on the subject I just bought a hydraulic table cart from Harbor
> > Freight.
> > The bigger one (1,100 lb capacity model 38074, max. H. 33 1/4", length
31
> > 5/8, width 19 5/8, weight 187lbs.) Reg. price around $179 Sale price
right
> > now is $199.
> > Jamie
> > Affordable TV Repair
> > ----- Original Message -----
> > From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Saturday, February 28, 2004 7:11 AM
> > Subject: [TechAssist] Re: Projo repairs on the floor. alternatives?
> >
> >
> > > You won't find this cart on the TSC web site Phil but they did have
them
> > at
> > > the local store. I went and asked and they did not know they had them
> but
> > > looking around they were there. It looks almost the same as the one
> shown
> > on
> > > the Harbor Freight site, 330 LB capacity, min height about 9 inches,
max
> > > height is about 28 inches. I added a wooden table top to increase the
> > height
> > > to about 31 inches since that is the height of my shelves and work
desk
> > and
> > > also to increase the work surface size. It works great for moving
large
> > > direct view sets and small projo's in and out of the shop and from
shelf
> > to
> > > desk, (large military surplus desk). It also works well for the larger
> > heavy
> > > projo's but a second person is sometimes needed to lift it on/off the
> cart
> > > and those darn casters on the projo's are a pain so I found a good use
> for
> > > paper service manuals, put a stack under each end to lift the set off
> it's
> > > casters then it won't try to roll around.
> > > **************************************************
> > > Jim Myers
> > > Since 1972
> > > Telrad Electronic Services Co.
> > > Fort Wayne, IN 46815
> > > *************************************************
> > > ----- Original Message -----
> > > From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Saturday, February 28, 2004 9:20 AM
> > > Subject: [TechAssist] Re: Projo repairs on the floor. alternatives?
> > >
> > >
> > > We have a TSC in Lake Wales, just about 15 min south. I did not see
any
> > on
> > > their
> > > web site last night. That seems better than the smaller tops from
Harbor
> > > freight.
> > >
> > > Phil
> > >
> > > Old Damon wrote:
> > >
> > > > Are you by yourself? If not, my boss found a 36" hydraulic cart,
that
> > > > amazingly can handle the heaviest oak cabinet projo you could think
> of.
> > > > Downside to that heavy cabinet scenario is it took 2 guys to tilt it
> on
> > > one
> > > > side, one guy to balance the load while the other moved the cart
> > > underneath
> > > > it. The table is about 6-8 inches off the ground, but all carts will
> > have
> > > > that. It cost him $150.00 at the local TSC (Tractor Supply) Store.
> > > >
> > > > Can you believe it? You have any TSC's down there? Or any store that
> > seems
> > > > to deal with part farm/part auto/part lumber/part doodad type of
> stuff.
> > We
> > > > have a D&B Electronics/Tools and a "Something" Freight store that
> deals
> > > > with >>overstock<< surplus. I think that's the key to the >type< of
> > store
> > > to
> > > > look for.
> > > >
> > > > Any questions, just reply and I'll try to be more concise.
> > > >
> > > > Damon Brunger
> > > > Telrad Electronic Services
> > > > Ft Wayne, IN 46815
> > > >
> > > > ----- Original Message -----
> > > > From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Friday, February 27, 2004 4:44 PM
> > > > Subject: [TechAssist] Projo repairs on the floor. alternatives?
> > > >
> > > > > Without opening a can of worms here , ;-)
> > > > > I remember a LOT of posts about those lift carts
> > > > > I have an arthritic back and working down on the floor on these
> projos
> > > > > hurts. Elbow on the floor supporting me sideways as i solder and
> hold
> > > > > things up at the same time...
> > > > > .
> > > > > Is there a general consesis as to the best method to elevate a PTV
> up
> > a
> > > > > few feet and be sturdy, stable and with the lifting device out of
> the
> > > > > way (no braces,etc in front of the work area).
> > > > > Not necessarily to move it about, just hike it up where I can sit
> and
> > > > > solder.
> > > > > I'm 48 going on 88.
> > > > > Phil Bader
> > > > >
> > > > > --
> > > > >
> > > > > Philip Bader
> > > > > Jan Phyl TV Inc. (estab. 1976)
> > > > > 3420 Recker Hwy. Winter Haven, Fl. 33880
> > > > > Fax (863) 299-8821
> > > > > email: tjanphyl@xxxxxxxxxxxxxxx
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > > ---
> > > > > Lost Password:
> > > > > http://www.tech-assist.org and select "Login Problems?".
> > > > > Email Archives:
> > > > > http://www.freelists.org/archives/techassist/
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > ---
> > > > Lost Password:
> > > > http://www.tech-assist.org and select "Login Problems?".
> > > > Email Archives:
> > > > http://www.freelists.org/archives/techassist/
> > >
> > > --
> > >
> > > Philip Bader
> > > Jan Phyl TV Inc. (estab. 1976)
> > > 3420 Recker Hwy. Winter Haven, Fl. 33880
> > > Fax (863) 299-8821
> > > email: tjanphyl@xxxxxxxxxxxxxxx
> > >
> > >
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > -
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > http://www.freelists.org/archives/techassist/
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> > ---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > http://www.freelists.org/archives/techassist/
> > >
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > http://www.freelists.org/archives/techassist/
> >
> >
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/
- References:
- [TechAssist] Projo repairs on the floor. alternatives?
- From: Phil Bader
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Old Damon
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Phil Bader
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Jim Myers
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Jamie
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: al m
Other related posts:
- » [TechAssist] Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- » [TechAssist] Re: Projo repairs on the floor. alternatives?
- [TechAssist] Projo repairs on the floor. alternatives?
- From: Phil Bader
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Old Damon
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Phil Bader
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Jim Myers
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: Jamie
- [TechAssist] Re: Projo repairs on the floor. alternatives?
- From: al m