We do almost nothing but amps, maybe we can help . Were both channels blown?, Have u tried one channel at a time? Did u replace with exact # replacement? let me know.maybe i can help. Dan W. Wizard Electronics ----- Original Message ----- From: "markbrock" <markbrock@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 16, 2004 8:31 AM Subject: [TechAssist] Pioneer car amp > model GM-X962, mosfets all burnt up, replaced them and repaired pcboard > at > B+, low volume is ok but when turned up ( on the amp) it distorts, then, > one of the mosfets gets hot and shorts, ( Q905), and never draws much > current, 3-4 amps ? when its running on low volume, 750 watt, I'd think > it > would draw much more even at low, all the bias resistors ohm ok, not > sure > where the problem is and not my forte', any ideas appreciated, the > mosfets were Q905,6,11,12,13 &14 > brock > > Brock Electronics > R.R.4 box 237 > 5208 cr.3385 > Independence Ks. 67301 > 620-331-0235 > fax 331-7191 > > markbrock@xxxxxxxxxxxxx > Zenith*Philips*Peavey*Fender*Crate > we work on all brands,makes,models > of anything that plugs in the wall > ----- Original Message ----- > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/