model GM-X962, all the mosfets were blown and burnt spot on pcboard @B+, changed em all, now distorts when pot on amp is turned up and Q905 ( first mosfet gets hot and shorts out ) all the bias resistors check ok, 120 and 22 ohms ok, both sides do this so its in the preamp stage somewhere ? thanks for any help, I'm in too deep to get out now. brock Brock Electronics R.R.4 box 237 5208 cr.3385 Independence Ks. 67301 620-331-0235 fax 331-7191 markbrock@xxxxxxxxxxxxx Zenith*Philips*Peavey*Fender*Crate we work on all brands,makes,models of anything that plugs in the wall ----- Original Message ----- From: "gordon elder" <directservice246@xxxxxxxxx> To: "Tech-Assist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 14, 2004 2:23 PM Subject: [TechAssist] Directv Recievers > Hi > We need some directv recievers,about 10.The model numbers can be any of he following: DRD420RE > HIRD1 > RCADRD420RE > Thank you. > > > Gordon Elder > > Audio video Technician, > > Lewis Satellite > > Shadowed lawn, > > Brittons Hill, > > Barbados. > > > > --------------------------------- > Do you Yahoo!? > vote.yahoo.com - Register online to vote today! > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/