[TechAssist] Re: Phillips projp

Well, I found nothing at all on your set as far as
vertical goes.
I would start by 
esr'ing the elyc. caps in the vertical, and
checking around the output IC.
Sorry, I don't have the schematic.
Walter
--- Avery Boyd <adBoyd@xxxxxxxxxxxxx> wrote:
> WORKING ON A pHILLIPS PTV 805-aho1. set HAS ABOUT
> a 20" pict across the
> middle. top and bottom curved in a little. Any
> Ideas. Thanks Avery
> Avery Boyd
> 4666B S. Mingo
> Tulsa OK 74146
> Phone 918-665-2400
> 
> 
>
-----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org  and select "Login
> Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/


=====
Walter Wood                  
Future Tech Home Center        
2786 Hwy. 43 N.
Lawrenceburg Tn. 38464
931-829-3337
Fax 931-829-4044
mailto:wwood_38478@xxxxxxxxx


        
                
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs  
http://hotjobs.sweepstakes.yahoo.com/careermakeover 

-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: