[TechAssist] Re: Phillips 25P1-02 chassis - Model# PK4485 (CH03)
- From: peggs <peggs@xxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx, <techassist@xxxxxxxxxxxxx>
- Date: Thu, 12 Dec 2002 13:44:09 -0600
This must be a different chassis than the Open resistor I
spoke of.
Can you sub a Yoke ???
Peggs
At 11:12 AM 12/12/02 -0500, David Lessard wrote:
>
>Gentlemen,
>
>Vertical size is only 6" (in the center), replaced (5) caps in vertical
>circuit and LA7838, problem still there. Vertical adjust has minimal effect
>on size. Something in the sync seperation circuit? Schematic would come in
>real handy.
>
>Thanks.
>
>David Lessard
>Alexandria Electronics
>50 Harrison Street
>Alexandria, Ontario
>(613)525-4502
>mrfixit@xxxxxxxxxxx
>------------------------------------------
>Submit A Repair Tip For Everyone Here:
>http://www.tech-assist.org/secure/tip/main.html
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
Peggs' Electronics
1519 West 2nd Street
Owensboro,KY 42301
270-926-4968
fax 270-686-7399
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
