[TechAssist] Re: Philips 50P8342 (PTV916) cust. said got lines, then dead. works OK here

Phil,
That would be my guess...I've done a couple for different problems and changed 
that board.
Philips\PTV910\Various intermittent problems\Intermittent on/off\\60in 
Projection\SSB CBA Module-various
leaky fish caps-This is your brains or control board\This is a double sided 
standup module that plugs in
to the small signal panel\About 4 x 5 inches in size. It also has a ribbon 
cable that runs up to the PIP
module\One of the caps leaked and corroded a flat pack IC causing all sorts of 
intermittent problems\\\\\
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com  www.tech-repair.net
----- Original Message ----- 
From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, July 29, 2004 1:17 PM
Subject: [TechAssist] Philips 50P8342 (PTV916) cust. said got lines, then dead. 
works OK here


This is one of the SSB module sets.
Customer indicated it went to lines (horiz. hold?, love that
descriptiontechass) and then dead. The local shop has it and is working
fine.
Any issues on this one?
SSB thermal?
Phil Bader

-- 

Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: