You got the right part number but the Philips parts list for that chassis calls it a 10K, looks like Sams copied a mistake from Philips. Jim Myers jr.myers@xxxxxxxxxxx ----- Original Message ----- From: "John Colwell" <jcolwell@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, January 13, 2002 12:52 PM Subject: [TechAssist] Re: Philiips/Magnavox Ch 27D100-7570 Sams 4165 Jim Just for information Went to Vance Baldwin site and entered resistor part # as listed in sams 4165 2322 195 63104 It comes up as RMO 3W 100K resistor. Would have done it yesterday but site was down with this information and the fact that it has worked and resistor wasn't discolored and within tolerance am going to leave it in place. I just didn't want to have any other problems with this unit. I warranty all repairs for 6 months and didn't want to have to go get it again it lasted the last time 7 months but anything that close I repair for nothing except for the parts. Thanks again for your time John Entertainment West Noirwood, Co ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, January 12, 2002 9:07 AM Subject: [TechAssist] Re: Philiips/Magnavox Ch 27D100-7570 Sams 4165 > > John, > Model TP2781C101 uses a 27D7 chassis, not 27D1. Ref# 3917 in the D7 chassis > is a 10K resistor and ref# 7620 is a BU2508AF. > Jim Myers > jr.myers@xxxxxxxxxxx > ----- Original Message ----- > From: "John Colwell" <jcolwell@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, January 12, 2002 10:44 AM > Subject: [TechAssist] Re: Philiips/Magnavox Ch 27D100-7570 Sams 4165 > > > > Model # TP2781C101 Philips/Magnavox > > The reason for this post is over the years (35) have found Sams to be > incorrect on many items. In this schematic they list a Q7620 BU2508AF > substitute as ECG2353 whitch has a built in diode (wrong again) > > Thanks for your time > John > ----- Original Message ----- > From: "DEVROUGH GROUP" <TechDept@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, January 12, 2002 7:15 AM > Subject: [TechAssist] Re: Philiips/Magnavox Ch 27D100-7570 Sams 4165 > > > > > > Model number please, to confirm > > > > -----Original Message----- > > From: techassist-bounce@xxxxxxxxxxxxx > > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of John Colwell > > Sent: Saturday, January 12, 2002 8:46 AM > > To: techassist@xxxxxxxxxxxxx > > Subject: [TechAssist] Philiips/Magnavox Ch 27D100-7570 Sams 4165 > > > > SMPS regulation problem. Found resistor R3917 is 100K and this is > original > > resistor from factory Sams call for R3917 to be 10K 5% 3wt. Before I > change > > it to 10K thought would check and see if anyone has original schematic > that > > shows this resistor as 100K or should it really be 10K? > > > > It would have been easy to mistake for 10K by color code but question > > placing a resistor 10 times schematic value in its place by factory? > > > > Appreciate any help > > > > John > > Entertainment West > > > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.