[TechAssist] Re: Panasonic VCR NV900 No vertical lock
- From: "Christopher Barnak" <cbarnak@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 15 Jun 2005 13:38:15 -0400
Ken, are you saying then unit reproduces a picture that rolls
vertically?
If so then (in order of probablility) :
1 The tapepath alignment is off.
2 The back tension is low.
3 The Pinch Roller is bad.
4 The head switch point is wrong.
5 I don't know
Christopher Barnak, CET
Norfolk Public Schools
Electronics Maintenace
966 Bellmore Ave.
Norfolk, Va. 23504
Phone 757 628 3385
Fax 757 628 3392
cbarnak@xxxxxxxxxxxxx
>>> alltv@xxxxxxxxxxxxx 6/14/2005 3:36:57 PM >>>
Hello All,
I just want to know if anybody had experience about this problem.
Also need svc manual
Thanks in Advance
*************************************
All TV Appliance Service
Ken Dinckan
2747-B Roosevelt Street
Carlsbad CA, 92008
(760) 434-1131
-----------------------------------------------------------------------------
This Email List is Public. Remove:
http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login
Problems?".
Appliance Repair List:
http://www.tech-assist.org/secure/tip/chatjoin.htm#app
Email Archives: //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
