Hi Neil, You might check where the worm gear on the chassis meets the cassette carriage gear, look for tiny fragments that may have come off the carriage gear. It's likely the carriage gear is broken or worn and has jumped time. Bill Premium Technologies Ocean Park, WA. 98640 Phone: (360) 665-5984 Fax: (605) 253-4530 email: premtech@xxxxxxxxxxxxxx ----- Original Message ----- From: <tvdoctors@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, May 28, 2002 10:14 AM Subject: [TechAssist] Panasonic PV-C1350W > I hope someone can shed some light on this unit for me. The unit came in Dead. The only thing that happens is that the Program, On Timer and Record LED's stay on all the time. Pushing the power button has no effect or trying to insert a cassette. I checked all voltages that I could but could not find anything out of place. Has anyone run across this problem with these units? Could it be a reset problem? Mode switch Problem? TIA Neil > > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/