Hi Mando,I've never had much luck using NTE570.A better choice is the OEM or an R2M.May not be your problem but worth a try................ Don of HARTS-TVCR''ASC'' 9 Robert St,Oromocto,NB,Can,E2V3N2 hartstv@xxxxxxxxxxx Tel-5063579785,fax-3576010 cel-4701719 ----- Original Message ----- From: "armando guerra" <birdie@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, May 04, 2004 2:27 PM Subject: [TechAssist] Panasonic CTV Model # CT32G32\chasis ATPEDP282\Shorts hot is shorting > I have this set that came in dead.Fuses ok.The hot was shorted.I > replaced the hot (BU2508DF) and also D825 which was shorted also.I don't > have the manual but I used a nte 570 (avalanche diode).There was also a > cap C820 that was bad.Resoldered the hdt and fired set up. High voltage > comes up and as the pix was coming in,tv shuts dn and has a high pitched > sound.The hot and D825 are both shorted again.The flyback rings ok but I > guess it could still have an int shorted winding.I checked both R510 and > R511 and they are within tolerance.Has anyone had this problem with this > model that can give me some tips or idea's? Would apreciate any help. > Thanks > Mando > Birdie's TV & Electronics > Casa Grande, AZ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/