[TechAssist] Re: Panasonic CTV Model # CT32G32\chasis ATPEDP282\Shorts ho...
- From: "North Texas Distributors, Inc." <sales@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 6 May 2004 11:05:53 -0500
We ran into this same problem a few months ago and we found out that the
STR58041A is the only one that will work in Panasonic not the plain. I hope
this helps.
Lee Bateman
North Texas Distributors, Inc.
Sherman, Tx. 75090
1-800-553-6168
www.Northtexasdistributors.com
email: sales@xxxxxxxxxxxxxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of armando guerra
Sent: Thursday, May 06, 2004 10:15 AM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Panasonic CTV Model # CT32G32\chasis
ATPEDP282\Shorts ho...
I used a STR-58041 plain,no A at the end.My local dist.said that it would
work
ok.Maybe thats my problem.I have checked just about everything in the
reg.ckt.
Wonder what the difference is between the non A and the one with it?Rated
higher?
Thanks
Mando
Birdie's TV & Electronics
Casa GRande, AZ
MDileo0000@xxxxxxx wrote:
> Mando,
>
> Did you replace IC801 with original? Must be STR58041A.
>
> Dominic DiLeo
> Atlantic TV
> Freeport, Maine
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> In a message dated 5/5/04 2:09:35 PM Eastern Daylight Time,
> birdie@xxxxxxxxxxxxx writes:
>
> << I had already replaced the reg. STR-58041 yesterday.I am going over the
> reg.ckt
> and will check Q801,802. Thanks
> Mando
> Birdie's TV & Electronics
> Casa Grande, AZ
>
> Willie Hunter wrote:
>
> > Check the Regulator also Q801,Q802 and C815.
> > Willie.
> > Hunter TV
> > Detroit,Mich.
> >
> > >From: armando guerra <birdie@xxxxxxxxxxxxx>
> > >Reply-To: techassist@xxxxxxxxxxxxx
> > >To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
> > >Subject: [TechAssist] Panasonic CTV Model # CT32G32\chasis
> ATPEDP282\Shorts
> > >hot is shorting
> > >Date: Tue, 04 May 2004 10:27:42 -0700
> > >
> > >I have this set that came in dead.Fuses ok.The hot was shorted.I
> > >replaced the hot (BU2508DF) and also D825 which was shorted also.I
don't
> > >have the manual but I used a nte 570 (avalanche diode).There was also
a
> > >cap C820 that was bad.Resoldered the hdt and fired set up. High
voltage
> > >comes up and as the pix was coming in,tv shuts dn and has a high
pitched
> > >sound.The hot and D825 are both shorted again.The flyback rings ok but
I
> > >guess it could still have an int shorted winding.I checked both R510
and
> > >R511 and they are within tolerance.Has anyone had this problem with
this
> > >model that can give me some tips or idea's? Would apreciate any help.
> > >Thanks
> > >Mando
> > >Birdie's TV & Electronics
> > >Casa Grande, AZ
> > > >>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
