Mark, Check pins 3 and 4 for a short. Check Hot for short I have added you to my address book if you do not mind. You helped me with the RCA CTC 203, Thanks Les- be talking with you Les- ----- Original Message ----- From: "mark brock" <brock@xxxxxxx> Date: Sun, 12 May 2002 19:22:43 -0700 To: <techassist@xxxxxxxxxxxxx> Subject: [TechAssist] Panasonic CT27G6E > > Chassis AP362, quit after a power surge, I have too high b+ 165volts, > suspect ic801 but no prints and not to up on Panasonic's, IC801 is STRG5624 > ( no stock so have ordered ) pin 1 is 165 volts, 2 is 0, 3 is0 4 is 32 > volts and 5 is 1.3 volts. either something is dragging pin 4 down, cant' > find anything, or its bad ? any light on this chassis appreciated, > everything in the power supply including the xfmr ohms OK, > thanks for all input > brock > Brock Electronics > R.R.4 box 237 > Independence Ks. 67301 > 316-331-0235 > fax 331-7191 > brock@xxxxxxx > mailto:brock@xxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Email.com http://www.email.com/?sr=signup ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/