[TechAssist] Panasonic AG-RT600P Time Lapse VCR

This time lapse recorder will not record. I have checked all the supply 
voltages and traced signal from Video In to IC 3001 pin 7. I have followed it 
in and out and around till pin 22, I lose it. I have checked the voltage on 
every pin and found nothing abnormal. I hope someone works on these and may 
have had the same problem. I don't want to replace unnecessary parts if I can 
help it. It seems like the IC is the culprit but not sure.  BTW, it plays back 
normally.    Paul   

Paul ,B                                                                         
                                     Central TV&Video                           
                                                                               
Grover Beach Ca.

*****************************************************************************
Classifieds! Buy or Sell!
http://sell.tech-assist.org
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.htm
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.htm
Lost Password:
http://www.tech-assist.org  and select "Lost your Login Info?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: