[TechAssist] Re: PTK195, B+ high at about 162 volts

  • From: "John @ Myers TV " <myers_tv_b@xxxxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Sat, 11 Jun 2005 15:02:45 -0400

Jim,

Seems to me that 165V is normal for a 195 in standby mode. Have you 
tried starting the set with the splitter disconnected?

John Myers
Myers TV Service Co.
376 E. State St.
Alliance, OH 44601

Voice / Fax: 330-821-6545
Myers_tv_b@xxxxxxxxxxxxx
http://www.myerstv.net

Work as if you were to live a hundred years,
Pray as if you were to die tomorrow.
                           Ben Franklin




Jim Myers wrote:

>HOT was shorted, sub HOT allowed chassis to start up but with a loud 
>snap and shorted the sub HOT. Now with a new FBT it shuts down due to 
>the high B+ but does not short the sub HOT. Intention is to not install 
>the new OEM HOT until the high B+ is fixed.
>Does anyone have a tip?
>
>Thanks,
>
>********************************
>Since 1972                     *
>Jim Myers                      *
>Telrad Electronics             *
>Fort Wayne Indiana             *
>********************************
>-----------------------------------------------------------------------------
>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>Lost Password: http://www.tech-assist.org  and select "Login Problems?".
>Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app
>Email Archives: //www.freelists.org/archives/techassist/
>
>
>  
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app
Email Archives: //www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 06-2005