[TechAssist] Re: Mitsubishi-VCR mod#HS-U51C,no drum rotation
- From: "Don Hartigan" <hartstv@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 7 May 2002 15:11:11 -0300
Gary&Ed,as per my post already subbed the power supply.Tks for i/p's
tho....Don...
HARTS-TVCR''ASC''
9-Robert St.,Oromocto,NewBrunswick,CAN
Tel#506-357-9785Fax#506-357-6010
----- Original Message -----
From: "Gary McCartney" <number63@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, May 07, 2002 2:48 PM
Subject: [TechAssist] Re: Mitsubishi-VCR mod#HS-U51C,no drum rotation
>
> Isn't that the chassis where the large electrolytic in the power supply
> causes all kinds of problems?
>
>
>
> Gary McCartney
>
> McCartney Electronics
> 7134 Fife Rd, RR 7
> Guelph Ontario Canada N1H 6J4
> Fax: (519)821-1530
> email: number63@xxxxxxxxxxxxx
>
>
>
>
>
>
> Tel-Tek Electronics wrote:
> >
> > I usually sub the power supplies, if it looks like the micro....time to
> > retire it. In Canada..anyway.
> >
> > -Ed-
> > Tel-Tek Electronics
> > Midland, Ont. Canada.
> > teltek2@xxxxxxxxxxxx
> >
> > "Quality will be remembered, long after Price is forgotten"
> > ----- Original Message -----
> > From: "Don Hartigan" <hartstv@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, May 07, 2002 12:13 PM
> > Subject: [TechAssist] Re: Mitsubishi-VCR mod#HS-U51C,no drum rotation
> >
> > >
> > > Hi Ed,know the trans your referring to,it's a D2012,tryed that but no
> > go.I'm
> > > wondering if maybe I have a micro problem??tks for reply...Don.......
> > > HARTS-TVCR''ASC''
> > > 9-Robert St.,Oromocto,NewBrunswick,CAN
> > > Tel#506-357-9785Fax#506-357-6010
> > > ----- Original Message -----
> > > From: "Ed Gaidies" <teltek2@xxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Tuesday, May 07, 2002 8:08 AM
> > > Subject: [TechAssist] Re: Mitsubishi-VCR mod#HS-U51C,no drum rotation
> > >
> > >
> > > >
> > > > Don;
> > > > I'm not in the shop right now but that problem sounds familiar.
> > > > Check the transistor mounted on the bottom of the deck, screwed onto
the
> > > > metal track of the supply guide.
> > > >
> > > > -Ed-
> > > > On Monday, May 6, 2002, at 11:56 PM, Don Hartigan wrote:
> > > >
> > > > > Not sure if I have 2 faults on this unit or the absence of one
causes
> > > > > the other.Unit will load the ''cassette'' &emmediately unloads it;
the
> > > > > upper drum does not rotate as with most vcr's upon cassette load
the
> > > > > upper drum starts it's rotation before ''tape load'' starts to
> > > > > thread.Replaced mode switch,drum motor,load cage,power supply from
> > > > > another serviceable unit.Also replaced IC502 &IC4A0.There is B+ to
the
> > > > > drum IC,M51721.Have no print for this guy so anyone have a tip as
to
> > > > > what I'm missing.Which IC provides drive for the drum ic.I know
these
> > > > > units are famous for hardened black grease on the main gear
mech,which
> > > > > I cleaned & all plastic worms & cam gears look good.Customer ok'ed
a
> > hi
> > > > > estimate on this 4 head hi-fi unit so would like to get a
> > > > > fix....TIA....Don.......
> > > > >
> > > > > HARTS-TVCR''ASC''
> > > > > 9-Robert St.,Oromocto,NewBrunswick,CAN
> > > > > Tel#506-357-9785Fax#506-357-6010
> > > > >
> > > > > ------------------------------------------
> > > > > To REMOVE your email address, click here:
> > > > > http://www.tech-assist.org/unsubb.html
> > > > > ------------------------------------------
> > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > Submit Repair Tips here:
> > > > > http://www.tech-assist.org/secure/tip/
> > > > >
> > > > >
> > > > Regards;
> > > > -Ed-
> > > >
> > > > Tel-Tek Electronics
> > > > Midland, Ontario, Canada.
> > > >
> > > > teltek2@xxxxxxxxxxxx
> > > > teltek@xxxxxxx
> > > > "Quality will be remembered...long after Price is forgotten"
> > > >
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > ------------------------------------------
> > > > ***NEW*** Tips Added Instantly!!!***
> > > > Submit Repair Tips here:
> > > > http://www.tech-assist.org/secure/tip/
> > >
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
> --
>
>
>
> Gary McCartney
>
> McCartney Electronics
> 7134 Fife Rd, RR 7
> Guelph Ontario Canada N1H 6J4
> Fax: (519)821-1530
> email: number63@xxxxxxxxxxxxx
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
