[TechAssist] Re: Mitsubishi model cs-26301c

Thanks Jeff  I haven't tried the pip  bypass yet but I will on monday thanks
again!

Shoreline Electronics wrote:

> Don,
>
>  I would bypass the PIP module just to be sure.There may be other SM caps on
> that module which are defective besides the ones you checked.
>
>  Here is the bypass procedure in case you don't have it.
>
> Remove "Vp" Plug From Pip Mod.Install .01 From Pin 7 To Pin 9 Install
> 4.7/35-50v;Pos.To Pin 5,Neg. To Pin 11
>
> If you do not want to remove the VP plug from the PIP module , you can tack
> the caps on the solder side of the PC board.
>
> Jeff Stielau
> Shoreline Electronics Repair
> 125 Beechtree Lane
> Westbrook,CT 06498
> 860-399-1861 Voice
> 860-664-3535 Fax
> jstielau@xxxxxxxx
>
> ----- Original Message -----
> From: "trippel" <dtrippel@xxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, August 16, 2001 11:42 PM
> Subject: [TechAssist] Mitsubishi model cs-26301c
>
> >
> > Hi everyone!
> >
> > I'm having a problem with a misubishi model cs-26301c. No vertical or
> > horizontal sync. color poor or goes to no color. I have checked a few
> > caps on the pip modul,c7001,7031 can't find the problem?
> > Any help would be great. thanks in advance.
> > Don Trippel
> > Don's Electronics
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: