Don, I would bypass the PIP module just to be sure.There may be other SM caps on that module which are defective besides the ones you checked. Here is the bypass procedure in case you don't have it. Remove "Vp" Plug From Pip Mod.Install .01 From Pin 7 To Pin 9 Install 4.7/35-50v;Pos.To Pin 5,Neg. To Pin 11 If you do not want to remove the VP plug from the PIP module , you can tack the caps on the solder side of the PC board. Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "trippel" <dtrippel@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, August 16, 2001 11:42 PM Subject: [TechAssist] Mitsubishi model cs-26301c > > Hi everyone! > > I'm having a problem with a misubishi model cs-26301c. No vertical or > horizontal sync. color poor or goes to no color. I have checked a few > caps on the pip modul,c7001,7031 can't find the problem? > Any help would be great. thanks in advance. > Don Trippel > Don's Electronics > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.