[TechAssist] Mitsubishi VS50603 - VZ5 Chassis Locks to input 1
- From: "Gary Pahls" <bec@xxxxxxxxx>
- To: "Techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Fri, 15 Jul 2005 12:29:56 -0500
This unit reverts to the home theater mode after a power failure. When power
is restored the input button will only access tuners A & B and has sound but no
picture. If I go to the AV connection menu, the LOCK TO INPUT 1 sub menu says
YES, upon changing it to NO the set resumes normal operation but has Input 4
installed, this set has no Input 4. I can go to the service menu and remove
input 4 but after a power failure it returns. Are there option bytes in the
service menu that may have changed (and if so how do I change them back)
causing my trouble or am I looking at an eprom failure. The only info I have
on this set is a simple sheet of access codes to enter the service menu.
TIA
Gary Pahls
Beloit Entertainment Center
bec@xxxxxxxxx
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
