[TechAssist] Re: Mitsubishi VS5043 (VZ3 Chassis) Dead

Jeff, the set is in shut down.
Willie.
Hunter TV
Detroit,Mich.
Intrepid Video Support <support@xxxxxxxxxxxxxxxxxx> wrote:
I don't know what method you use to clean the boards, but perhaps some fluid 
got under one of the IC's.
Is the set dead, or shut down?
I clean fluid damaged boards by placing them in the dish washer, then the over 
under warm for about 10
minutes, then let set for a couple days.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message ----- 
From: "Willie Hunter" 
To: 
Sent: Sunday, October 31, 2004 4:03 PM
Subject: [TechAssist] Mitsubishi VS5043 (VZ3 Chassis) Dead


I have a Mitsubishi VS5043,(VZ3 Chassis) that dead. replaced shorted Q5a02,F902
checked caps.still dead. the green CRT had leaked fluid on the board cleaned,
still dead. anyone with a tip on this one or service manual they could upload
to the members area or email me directly would be greatly appreciated.
Thanks in advance.
Willie.
Hunter TV
Detroit,Mich.



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: