The vertical IC location# is IC4B01. part# TDA8177. IC's pin outs: 1. -in 2. Vcc 3. FLBGEN 4. ground 5. OUT 6. OUT Vcc 7. +in I sent you a little something in 2 pdf's to your personal addy. Phil Phil Bader, Pres. Jan Phyl TV Inc Winter Haven, Fl (863) 299-8821 estab. 1976 personal email: pbader@xxxxxxxxxxxxxxx ----- Original Message ----- From: armando guerra <birdie@xxxxxxxxxxxxx> Date: Wednesday, October 19, 2005 6:26 pm Subject: [TechAssist] Mitsubishi Projo TV Model VS-50111\Has high voltage,no pix. > This set when powered on,high voltage comes up ok and sound is also > ok.The filaments are lit.Just no pix.I don't have the manual but I > thinkthat it might be the vertical ic that is bad.It looks like it > beenrunning hot because the #'s on are erased,cannot read the LA #. > Does anyone have any tips on this model for the mentioned symtom or > maybe an ID on the vertical ic. Thanks. > Mando > AZ > PS Cannot see the chasis # any where (VZ-4 ) or what. > > ------------------------------------------------------------------- > ---------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacationLost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/