David, I'm not sure on that set, but check the HOT as well as check for a shorted yoke. Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, December 27, 2003 2:54 PM Subject: [TechAssist] Mitsubishi Proj. VS-4543. Chassis VZ3. Dead, power indicator on. Found fuse F902 open. Can anyone help with this? Customer said set shut off, but had a line across the top of the screen, then went off. I found some bad connections around / on the convergence ic's, and found (fuse F902 open), trying to trace out the circuit, I'm working without a schematic on this chassis. All other fuses and protection pico fuses are good. I can't find a schematic listed for this model/chassis, even Sam's didn't even shown one. I'f anyone has a zip or .pdf download of this chassis to email, that would be great? Thanks for any help with this. Greatly appreciated. David. Robinson Electronics 1075 Sweeten Creek Road Asheville, NC 28803 Ph./Fax. 828 274-3787 www.robelect.com Mailto: RobinsonElectronics@xxxxxxxxxxx ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/