David, From Tech Repair CD: MITSUBISHI \WS48311\Video Distorted All Modes\\\V20 Chassis\Replace Ic2k00 (270p623010) Located On The Stand Up Jack Pcb. Heating And Cooling Made Problem Change\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, June 16, 2004 3:48 PM Subject: [TechAssist] Mitsubishi Proj. Model WS-48313. Chassis V22. Vertical Lines 1/4 in apart, all the way across the screen. Requesting technical help on this projection set? No bad error codes.Has vertical lines (straight up & down, not wavy) about ¼ in. apart all the way across the screen in the raster, with the video. The color is bad - blooming and feathered out some. This was intermittent at first for a day or two, now continuous. Cold spray did not indicate any thermal problem. Voltage measurements in the power supply are good. Can you help us with any diagnostics on this problem, or circuit that possibly may be bad? Thanks, David Robinson; Robinson Electronics. Robinson Electronics 1075 Sweeten Creek Road Asheville, NC 28803 Ph./Fax. 828 274-3787 Toll Free. 1-888 ROBELECT www.robinsonelectronics.com www.robelect.com Mailto: RobinsonElectronics@xxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/