[TechAssist] Re: Mitsubishi No sound dim small pix

This is a nightmare. P/P volt. 1150 (1200) wave form clean all secondary
voltage from ihvt on the money. the only thing I fine is drive to r/b/g
transistors is real low these come from the a/v board and this thing is
almost impossible to check it has audio and video and micro sync. and almost
everything the set needs to operate I guess I will have to order and try but
hate to spend 115.00 for nothing. tia Ben
----- Original Message -----
From: "Shoreline Electronics" <jstielau@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, September 12, 2001 2:29 PM
Subject: [TechAssist] Re: Mitsubishi No sound dim small pix


>
> I'd think you'd still get a full raster if sweep was at 100%
>
> Is the image you see only 12" but the raster full screen?
>
> Jeff Stielau
> Shoreline Electronics Repair
> 125 Beechtree Lane
> Westbrook,CT 06498
> 860-399-1861 Voice
> 860-664-3535 Fax
> jstielau@xxxxxxxx
>
> ----- Original Message -----
> From: "Ben Daniels" <benstv@xxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, September 12, 2001 12:56 PM
> Subject: [TechAssist] Re: Mitsubishi No sound dim small pix
>
>
> >
> > HV ok drive ok h/o 125v all sweep dirived volts ok I am thinking this
> maybe
> > av bd. whats your thought. Ben
> > ----- Original Message -----
> > From: "Shoreline Electronics" <jstielau@xxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, September 12, 2001 10:14 AM
> > Subject: [TechAssist] Re: Mitsubishi No sound dim small pix
> >
> >
> > >
> > > What is your 2nd anode voltage?
> > >
> > > Sounds like low horz drive or low B+ to the HOT.
> > >
> > > Jeff Stielau
> > > Shoreline Electronics Repair
> > > 125 Beechtree Lane
> > > Westbrook,CT 06498
> > > 860-399-1861 Voice
> > > 860-664-3535 Fax
> > > jstielau@xxxxxxxx
> > >
> > > ----- Original Message -----
> > > From: "Ben Daniels" <benstv@xxxxxxxxxxxxxxxx>
> > > To: "techassist" <techassist@xxxxxxxxxxxxx>
> > > Sent: Wednesday, September 12, 2001 10:54 AM
> > > Subject: [TechAssist] Mitsubishi No sound dim small pix
> > >
> > >
> > > >
> > > > Mod; CK-31304 Unit has no pix untill you turn screen all the way up
> then
> > > it
> > > > is dim and small 12" sq. also no sound. You can see faint pic and
see
> > that
> > > > it changes channels. Have run block flow chart and all voltages are
> ok.
> > > > There is video bd. that is upright on main chassis changed it no
> > > difference.
> > > > Would someone have had this before maybe? Steer me in the right
> > direction.
> > > > Tia Ben
> > > >
> > > > Help make your TechAssist online repair tips
> > > > database better!  Submit your fixes here:
> > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with  unsubscribe  in the subject line.
> > > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better!  Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with  unsubscribe  in the subject line.
> > >
> >
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: