[TechAssist] Re: Mitsubishi CS3515R no power up
- From: Ed Gaidies <teltek2@xxxxxxxxxxxx>
- To: TechAssist <techassist@xxxxxxxxxxxxx>
- Date: Wed, 31 Jul 2002 08:41:44 -0400
Barry;
I'll forward this to the shop, will check when I get there. Should have
something on it.
BTW,,,Is K901 not used for degaussing only? Not sure.
-Ed-
Tel-Tek Electronics
Midland, Ontario
Canada.
teltek2@xxxxxxxxxxxx
teltek3@xxxxxxxxxxxx
teltek@xxxxxxx
"Quality will be remembered....long after Price is forgotten"
Barry MacInnes The above is the reply to your message dated 7/31/02 8:09
AM
> Hi Guys,
> This unit starts to power up then the power relay shuts down. If I bypass
> the relay picture and sound are OK but the power relay (K901) does not latch
> and keeps cycling on and off. Has anyone the resolution for this problem?
> Thanks,
> Barry
> TV Service Clinic
> W. Lebanon, NH
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
- References:
- [TechAssist] Mitsubishi CS3515R no power up
- From: Barry MacInnes
Other related posts:
- » [TechAssist] Mitsubishi CS3515R no power up
- » [TechAssist] Re: Mitsubishi CS3515R no power up
- » [TechAssist] Re: Mitsubishi CS3515R no power up
- » [TechAssist] Re: Mitsubishi CS3515R no power up
- [TechAssist] Mitsubishi CS3515R no power up
- From: Barry MacInnes