[TechAssist] Re: Mitsubishi CS-2723C, 1990 model, chassis VM1-A-C23R, lack of width

Make sure you change C916 on that set. 10ufd/100volts. No matter what it
checks for ESR. IMPORTANT.

-Ed-



Tel-Tek Electronics
Ontario-Canada

teltek3@xxxxxxxxxxxx
----- Original Message ----- 
From: "Kevin" <kevintv@xxxxxxx>
To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, April 06, 2004 4:03 PM
Subject: [TechAssist] Mitsubishi CS-2723C, 1990 model, chassis VM1-A-C23R,
lack of width


> Picture is 1-2 inches narrower than it should be at first turn on.
> After a few minutes the width is normal.  All caps in hor, pincushion
> and P/S checked good for ESR.  Any tips on this set?  It still has a
> very good picture for an older set so is worth repairing.  TIA
>
> Kevin Wilks
> Kevin's TV & Video Repair
> Penticton BC Canada
> kevintv@xxxxxxx
>
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: