[TechAssist] Re: Mits VS-45VA1 Converg schematic needed
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 4 Oct 2004 23:13:16 -0400
Gary,
Why not give the location of the resistors, then go to www.tritronicsinc.com
and see if they are listed
for that model.
This would make it a lot easier, since the service manual is in electronic
format and takes time to
convert sections to send..
Also, a chassis number would help, since each model is in the chassis folder.
Plus..did you use original convergence amps?
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Valley TV" <valleytv@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, October 03, 2004 11:37 PM
Subject: [TechAssist] Mits VS-45VA1 Converg schematic needed
Hi everyone!
Does anyone have a scan of the convergence schematic for Mitsubishi VS-45VA1
that can be uploaded or
emailed to me (valleytv@xxxxxxx)?? I replaced both STK's and it restored
operation of the unit but the
small resistors are burnt beyond belief and there is severe mis-convergence in
the bottom and top left
corners of the picture.
TIA!!!!!
Gary-
Valley TV
Berwick, Pa office
--
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
