Your right Max so dose these. I took a flashlight this time. I don?t know why I didn?t see it the first time guess I was tired, it was late. Sorry gang. If you go to Tritronics website and type in 95-4414-01it tells you it?s a transformer. I just now went to Vance Baldwin and put that part number in and it came up with transformer deflection yoke, now that makes more sense. Why can?t they just call them yokes? Thanks every one for getting me on the right track. My own stupidity caused me a lot grief not seeing the 95 at the beginning. Even with the right part number it was confusing. Jerry Old TV Man <mebonnell@xxxxxxxxx> wrote: The Zenith yokes that I have start with 95-XXXX. Max Bonnell Bonnell TV Robinson, IL Sender: techassist-bounce@xxxxxxxxxxxxx From: peggs@xxxxxxxxxxxxx(peggs) Date: Wed, Dec 8, 2004, 11:58am (CST-2) To: techassist@xxxxxxxxxxxxx, techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Make: ZENITH, Model: PV4663MK Blue yoke needed Reply=A0to: techassist@xxxxxxxxxxxxx they're yokes I got those #'s right off of 'em Peggs At 09:29 AM 12/8/04, Gerald Gann wrote: =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0Peggs: Are you sure these are yokes? According to Tritronics 95-4038-01 is a transformer. I can put the 95 in front of 4414-01 (95-4414-01) the one I need and it comes up transformer also. I know yokes have windings and transformers have windings I would think they would call them yokes if that's what they are. I called Tritronics and they said 95 usually means Flyback. Can you confirm yours or yokes? If so maybe we are onto something here. If so I will put in a research for the 95-4414-01 with Tritronics. Thanks Jerry Alpha 21 Electronics Granite City, IL 62040 =A0=A0=A0=A0Ph. 618-452-8620 www.alpha21century@xxxxxxxxxxxxx peggs wrote: 95-4038-01 I have 3 of these. Will they work ??? Peggs At 06:32 PM 12/7/04, Gerald Gann wrote: Al, Phil and Jim. What I did was switch the blue and red plug on the convergence board. If it were the STK's blue and red should have changed position. That's why I suspect a bad blue yoke. Every thing stayed the same. With plugs in correct position red and green convergence are perfect. Blue is pulled in on the right side about 1/3 of the screen and bowed also down at the top, tapered down. Numbers on the Yokes are all the same. Numbers on the CRT A17739-100-808-03 (170AGB22 (B)) Numbers on the Yoke 4414-01 under that 9511 Jerry Alpha 21 Electronics Granite City, IL 62040 =A0=A0Ph. 618-452-8620 www.alpha21century@xxxxxxxxxxxxx becyn wrote:The ring adjustments (if preset-which I haven't seen) are about the only difference on the new "dynamic convergence' sets. The old ones had no covergence windings on the green, but red and blue were the same. If you are changing yokes, save yourself the trouble retracing the harness by marking the color on the appropriate convergence plug. Jim McVey McVey Alltronix 327 Broadway Newburgh N.Y. 12550 Factory authorized service for over 20 major brands. 845 561 8383 Phil Bader wrote: Possible there is allowance for the physical placement of the yoke on the CRT as far as the alignment rings on it... But I had a late model 60" RCA this year with a broken CRT. I could only order the yokes as a wired set of three. I didn't want to disturb the good CRTs so I spliced the new yoke on the new CRT. There was no difference between any of the three yokes, all the same part#. Now, swapping used for used,I dunno. Phil Bader Phil Bader al m wrote: I think he put the blue yoke in one of the other colors circuits and it didn't correct the problem. But then the blue would be adjusted for the other color and it might still be off?????? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Phil Bader" To: Sent: Tuesday, December 07, 2004 7:52 AM Subject: [TechAssist] Re: Make: ZENITH, Model: PV4663MK Blue yoke needed Forgive my ignorance, but are not all three yokes the same? R,G and B? Phil Bader Intrepid Video Support wrote: What are the numbers on the CRT? Should be A-something. Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Gerald Gann" To: Sent: Monday, December 06, 2004 6:45 PM Subject: [TechAssist] Make: ZENITH, Model: PV4663MK Blue yoke needed Make: ZENITH, Model: PV4663MK Blue convergent is off. 9-1431 MAIN Chassis. Switched yoke plugs and blue is still off. Means bad blue yoke. Zenith only will sell the tube and yoke together. Any one have one in their bone yard. Jerry Alpha 21 Electronics Granite City, IL 62040 Ph. 618-452-8620 www.alpha21century@xxxxxxxxxxxxx ---------------------------------------------- ------- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ---------------------------------------------- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/