Check for broken mirror, Remove the ConvergencE yoke plugs, if there is not any change in picture shape, your problem could be a broken mirror. Good luck.. pete Perdomo TV Inc. Since 1972 Miami, Fl. Sender: techassist-bounce@xxxxxxxxxxxxx From: techassist@xxxxxxxxxx(Nova=A0Service=A0Center) Date: Fri, Oct 22, 2004, 10:25am To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Magnavox chassis PTV910 Model # 60p8241 Reply=A0to: techassist@xxxxxxxxxxxxx Hi all In this Magnavox projection TV Model # 60p8241, chassis PTV910 the top part of screen ( about 8 inches ) is missing and the rest of picture convergence is off. I replaced SSB and convergence IC's ( STK 392-110 ) , but it did not fix the tv. I need help . Thanks, Nova Service Center PO Box 2515 Gaithersburg, MD 20886 240-632-2994 mehdi@xxxxxxxxxx ---------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/