I think that's a degaussing relay. You need to give us some voltage measurements..... Main Filter Cap(if none,you may have a high wattage resistor open) 130v regulator Q400 BTW..... "Main Fuse not shorted"........ replace it...... :-)) Peggs At 12:13 PM 9/27/05, Tel-Tek Electronics wrote: >Need a hand on this set, guys. >Set came in dead. Resoldered R524 and R504 (1.6K 1 Watt) >Also C432 was open..and bulged. (100uf/200V) >Replaced it. >H/O not shorted. F401 Pico Fuse not open. >Main Fuse not shorted. > >I don't measure any voltage on Relay.... > >Any ideas and a Manual might help. > >Thanks; > >-Ed- >Tel-Tek Electronics >Ontario-Canada > >teltek3@xxxxxxxxxxxx >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search >engines. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/