[TechAssist] Re: Magnavox PTV350 need resistor value

Appreciate your time, this resistor is on the convergence wave form board,
over half the components on this board only have two numbers this
resistor(R45) is connected by trace path to JU2and R46 at one end the other
end looks like a ground and R41 goes to pin 13 of IC3. I just assume this
module could be like a lot of RCA chasis and leave off the beginning
numbers in some locations.  The only three digit markings on this module
begin with 1 ie R190.  Hope this is enough and I really appreciate the
help.  Terry


> [Original Message]
> From: Larry E. <videotech@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Date: 12/31/03 10:36:36 AM
> Subject: [TechAssist] Re: Magnavox PTV350 need resistor value
>
> Terry, According to NAP service manual all resistors are 3 digits,
re-check number, if it is 2 digits
> give me location, (tied to which parts) and I`ll check the schematic and
try to find it for you, LarryE
> Larry Eastman
> American TV & Electronics
> Crystal River, Fl. 34428
>
> Terry J Hutchison wrote:
>
> > Set came in with no filiment but had HV, replaced C455 restored
filiment volts but have burned resistor on deflection  board need value
cannot read it is R45. Thanks in advance for any help.  Terry
> >
> > Terry J Hutchison
> > sony1@xxxxxxxx
> > Why Wait? Move to EarthLink.
> >
> >
****************************************************************************
*
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > http://www.freelists.org/archives/techassist/
>
>
****************************************************************************
*
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/


*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: