C571 was down in value. All caps in most of the sections checked high ESR. They are using values too close to the supplies. Put higher V value in. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, May 30, 2004 11:34 AM Subject: [TechAssist] Magnavox MT1901 b101 no horizontal need print > This unit has no horizontal scan (line up and down). Need a print to see > what the value of two resisters that look like they changed colors and to > see what is going on with the main board. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/