David, Not sure if this will help, but it's the only tip I have for Magnasonic... From Tech Repair CD: MAGNASONIC\MCT2074\NO START* ONLY CLICK-CLICK\\\\REPLACE Q602(2SD1398) OR ECG2302* R628(1 OHM* 1/2W)\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "David Lessard" <mr_fixit@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, April 29, 2004 2:15 PM Subject: [TechAssist] Magnasonic MCT5301 14" - Dead. No relay click. Shorting relay brings on raster only. Dead. No relay click. Shorting relay brings on raster only. Then I can press the ON button and everything works fine. I can turn TV ON and OFF then ON again so long as I do this within a few seconds. Output voltage at IC602 is only 4.2VDC in standby but when relay is shorted voltage is normal at 5VDC. There is a tip in the Euras database http://www.euras.com/repair_tips_1/Magnasonic/MCT5301/MCT5301_Magnasonic .htm on this problem but I'm not subscribed to them. Any help would be greatly appreciated; I've spent a little too much time on this 14" set already and would like to recover at least some of my lost time. As always, thanks in advance. David Lessard Alexandria Electronics 50 Harrison Street P.O. Box 1366 Alexandria, Ontario. Canada K0C-1A0 mr_fixit@xxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: http://www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: http://www.freelists.org/archives/techassist/