about a jillion times......that is......if it uses C432,C431 Peggs At 01:32 PM 9/20/05, Paul wrote: >This set came in dead. Had two traces open from heat and a burned >resistor. Repaired traces and replaced resistor. Set came on but out of >horiz sync. B+ too high. Reduced voltage,set works fine. Replaced >regulator, voltage still too high. Replaced Q400 129V source still too >high. Checked all the litics,resistors and diodes in that circuit. Can't >find reason that the regulator is not working.Have basically the same >voltage out as is going in, 155v. Anyone else had this problem. I am >hoping it is not the IHVT. > Paul > > >Paul ,B >Central TV&Video >911W Grand Ave >Grover Beach Ca. >(805)481-8084 > >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search >engines. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/