[TechAssist] Re: MAGNAVOX 60P8241 PTV910 blue no focus

Thanks, I'll check that socket.

Dan W. Wizard Electronics

----- Original Message ----- 
From: "peggs" <peggs@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>; <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, March 29, 2005 9:34 PM
Subject: [TechAssist] Re: MAGNAVOX 60P8241 PTV910 blue no focus


>
> Focus problem could be a bad CRT Socket
>
> Peggs
>
> At 02:26 PM 3/28/05, danny williams wrote:
>>At turn on u see bowed lines, red blue and green at top of screen then the
>>pic comes on but conv out, and the blue won't focus. Adjusts, but won't
>>focus. Switched focus lead with red and it adjusts red ok so i would
>>assume pic tube bad?? or could the hv of the blue be affecting blue focus
>>??Replaced conv i.c's/no change. Also the main cust convergence adjust's,
>>but the service conv adjustments won't move!! Seems i have two problems,
>>anyone agree???
>>  Dan W
>>
>>
>>
>>Dan W. Wizard Electronics
>>-----------------------------------------------------------------------------
>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>Lost Password: http://www.tech-assist.org  and select "Login Problems?".
>>Email Archives: http://www.freelists.org/archives/techassist/
>
> --
> This message has been scanned by the OMU Online postini filter.
>
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: http://www.freelists.org/archives/techassist/
> 


-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: http://www.freelists.org/archives/techassist/

Other related posts: