Hi, I have a StudioWorks 20i with a small problem. Originally it had a pincushion problem )( image on 1024x768 resolution. I replaced a few components in the E/W circuitry (IRFS640, MTA114, 150nf/250V cap). Picture width and E/W is fine now but the horizontal linearity is not. On both sides the image is a bit compressed for about 1". I mean if you put on a test screen with squares the ones on the screen edges are about half the width as the other ones. I occurs only on 1024x768 resolution. All other resolutions are fine. Any suggestions or schematics available ? Thanks in advance. Alex Veltmans PC REPAIR CENTER Antwerp / Belgium ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/