I wonder if you have a bad flyback. Do you have B+ to the HOT and 32kHZ to the base of the HOT? Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Grabowski Sent: Friday, July 23, 2004 6:06 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: KDS VS21e EVOKD-2100K There's no HV at all. At either resolution. I'm using a Dell computer output and a VGA tester from data sync. I believe I'll have to order some schematics from KDS. Any suggestions?? Any would be appreciated......... Bill Grabowski Triangle Appliance Kenosha,Wi 53142 Technotronic Dimensions wrote: > Bill: > > The LED Change from Blink to Solid means Signal is detected. So > problem likely not on CRT PCB. > > If you Power off both the Test Signal and the Monitor, then Repower > the Monitor First, let the heaters Warm up, and power up the Test Signal > Source, What does it do? Do you hear HV Come up briefly with a Possible > Horiz Line visible on the screen for a Split Second? Try that test at > 640-480, then with it set to 800-600. Also, what are you using for the Test > Signal Source? > > Steve Hearns > Technotronic Dimensions, NY [USA] > WWW.TECHNOTRONIC-DIMENSIONS.COM > 1-877-817-9885 (Voice / Fax Toll Free - US Only) > > > ----- Original Message ----- > From: "Bill Grabowski" <bgrabowski@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, July 23, 2004 5:14 PM > Subject: [TechAssist] Re: KDS VS21e EVOKD-2100K > > > Yes I tried diffrent refresh rates. I started monitor and have green > pilot light with amber blink every second or so but no click when I > inject the signal.Then green pilot stays lit with no amber. It does > click when I change from 640+480 to 800+600. Thanks for the help. > > Bill Grabowski > Triangle Appliance > Kenosha,WI 53142 > > Technotronic Dimensions wrote: > >>Did you try different Refresh rate Settings? Start off on 640-480, listen >>for a CLICK when you apply the Signal with Power already on - let us know > > if > >>you hear a CLICK. >> >>Steve Hearns >>Technotronic Dimensions, NY [USA] >>WWW.TECHNOTRONIC-DIMENSIONS.COM >>1-877-817-9885 (Voice / Fax Toll Free - US Only) >> >>----- Original Message ----- >>From: "Bill Grabowski" <bgrabowski@xxxxxxxxx> >>To: "techassist" <techassist@xxxxxxxxxxxxx> >>Sent: Friday, July 23, 2004 3:00 PM >>Subject: [TechAssist] KDS VS21e EVOKD-2100K >> >> >>Would any tech have the schematics for this KDS model VS21e its my >>second request. Any help would be appreciated. Have changed >>flyback,HOT,and 2 burnt 1k resistors and need some help with why the >>filaments are lit but no HV. This is my last monitor. Thanks!! >> >> Bill > > -- ***************************** Bill Grabowski Triangle Appliance Kenosha,Wi 53142 262-694-6500 262-694-6523 fax bgrabowski@xxxxxxxxx ***************************** ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/