Yes I tried diffrent refresh rates. I started monitor and have green pilot light with amber blink every second or so but no click when I inject the signal.Then green pilot stays lit with no amber. It does click when I change from 640+480 to 800+600. Thanks for the help. Bill Grabowski Triangle Appliance Kenosha,WI 53142 Technotronic Dimensions wrote: > Did you try different Refresh rate Settings? Start off on 640-480, listen > for a CLICK when you apply the Signal with Power already on - let us know if > you hear a CLICK. > > Steve Hearns > Technotronic Dimensions, NY [USA] > WWW.TECHNOTRONIC-DIMENSIONS.COM > 1-877-817-9885 (Voice / Fax Toll Free - US Only) > > ----- Original Message ----- > From: "Bill Grabowski" <bgrabowski@xxxxxxxxx> > To: "techassist" <techassist@xxxxxxxxxxxxx> > Sent: Friday, July 23, 2004 3:00 PM > Subject: [TechAssist] KDS VS21e EVOKD-2100K > > > Would any tech have the schematics for this KDS model VS21e its my > second request. Any help would be appreciated. Have changed > flyback,HOT,and 2 burnt 1k resistors and need some help with why the > filaments are lit but no HV. This is my last monitor. Thanks!! > > Bill -- ***************************** Bill Grabowski Triangle Appliance Kenosha,Wi 53142 262-694-6500 262-694-6523 fax bgrabowski@xxxxxxxxx ***************************** ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/