[TechAssist] Re: KDS VS21e EVOKD-2100K

  • From: "Technotronic Dimensions" <steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 23 Jul 2004 15:29:46 -0400

Did you try different Refresh rate Settings? Start off on 640-480, listen
for a CLICK when you apply the Signal with Power already on - let us know if
you hear a CLICK.

Steve Hearns
Technotronic Dimensions, NY [USA]
WWW.TECHNOTRONIC-DIMENSIONS.COM
1-877-817-9885 (Voice / Fax Toll Free - US Only)

----- Original Message ----- 
From: "Bill Grabowski" <bgrabowski@xxxxxxxxx>
To: "techassist" <techassist@xxxxxxxxxxxxx>
Sent: Friday, July 23, 2004 3:00 PM
Subject: [TechAssist] KDS VS21e EVOKD-2100K


Would any tech have the schematics for this KDS model VS21e its my
second request. Any help would be appreciated. Have changed
flyback,HOT,and 2 burnt 1k resistors and need some help with why the
filaments are lit but no HV. This is my last monitor. Thanks!!

                                                        Bill
-- 
*****************************
Bill Grabowski

Triangle Appliance
Kenosha,Wi 53142
262-694-6500
262-694-6523 fax
bgrabowski@xxxxxxxxx
*****************************


----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: