Check G2 voltage supply if missing will cause this symptom also a shorted tube could do this. If G2 OK remove crt socket turn on see if still shutsdown. ----- Original Message ----- From: "Ndegwa, Amos" <A.NDEGWA@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 12, 2001 6:44 AM Subject: [TechAssist] Re: JVC AVG21 > > I have a similar problem and mine goes to high voltage shitdown after a few > seconds. The screen comes on and increases in brightness until shutdown. I > suspected the EHT transformer but I do not want to buy the wrong thing. > > -----Original Message----- > From: Kaushik Chudasama [mailto:westend@xxxxxxxx] > Sent: Saturday, September 08, 2001 11:30 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] JVC AVG21 > > > Hi Techs > This TV when switched on it goes to standby in few seconds. > Checked power supply . ok > FBT transistor ok > Vertical output ok > It uses Micro controller M37212m4-0502p. > Any help is appreciated > > Best regards > Nilesh > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.