Ok here's the story a 1Meg on the green and red and a 18K on the blue brought up a very good picture. Has anyone tried VR's in series with fixed resistors on here? Jim Mcvey had used them on the emitter buffer but I don't have any 2K VR's to try. Will try when I get the parts Jim. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: "tech assist" <techassist@xxxxxxxxxxxxx> Sent: Friday, June 03, 2005 8:48 AM Subject: [TechAssist] IK Modification >I just tried the IK modification on a Sony and it leaves the picture rather > dark. Is that the way it works? I tried the 27K and the 18K resistors. > Also > I see a diode mod that can be put on the CRT board. Does anyone have that? > I > don't have the remote to adjust the picture but looks too dark to me. Will > pick up remote. Thanks. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: > http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/