Ed, Tighten down all the screws that hold the chassis to the metal frame. I haven't seen that problem in many years, but it was common. Strangely, the further north you lived, the higher the incidence. Paul Westcott Kingsway Electronics 1090 Kingsway Sudbury,On. Canada Phone 705 566-9290 Fax 705 566-5349 ----- Original Message ----- From: Tel-Tek Electronics <teltek2@xxxxxxxxxxxx> To: AAAA TECH-ASSIST <techassist@xxxxxxxxxxxxx> Sent: Friday, June 14, 2002 7:01 AM Subject: [TechAssist] Hitachi G6XU Same as G6LXU without Memory Chip > > I have a Hitachi 20: here....TF-2467 Chassis G6XU. Customer complained > about set going to CH 2 on it's own. Ran it here for 3 days, and seemed OK.. > but finally started. It's intermittent, but it can be on any Channel, all of > a sudden, back to CH2. > Anyone had this problem...? I do not suspect the buttons at the front > doing this. > > TIA > > -Ed- > Tel-Tek Electronics > Midland, Ont. Canada. > teltek2@xxxxxxxxxxxx > > "Quality will be remembered, long after Price is forgotten" > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/