Kevin, Just repaired one a few months ago (same problem) it was cold solder on if I remember the pin transistor..right side 1/2 way between fly and front of board.. Pix had no bow but narrow... Hope this helps.. Bob. Bob's TV Worcester, ma woodman17@xxxxxxxxxxx ----- Original Message ----- From: "Kevin's TV Repair" <kevintv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 21, 2005 8:19 PM Subject: [TechAssist] Hitachi 32UX58B, M7LXU2 chassis, partial horizontal collapse > This set has partial horizontal collapse. The picture is only about 7 > inches wide from side to side. This is not vertical collapse which I am > familiar with and have repaired many. Should I be looking in the > horizontal section for bad caps? Thanks. > > Kevin Wilks > Kevin's TV Repair > Penticton BC Canada > kevintv@xxxxxxx > > > > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/