[TechAssist] Re: Help-mag.PTV775-Ah01 low b+

  • From: gulftech@xxxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Wed, 26 Sep 2001 09:47:23 -0500

Bob,

The 2SD2539 is the horizontal output transistor.  Although it crosses to
an NTE2353, it would be best to use the original.  Give Jason a call. 
Buy more than one.  You may need the spare.


Ken Smith
Gulf Technical Services
3034 Gulf Breeze Parkway
Gulf Breeze, FL  32561
850-934-8324 (Voice) 850-932-0819 (Fax)

----------------------

On Wed, 26 Sep 2001 10:35:23 -0400 "JMartin"
<JMartin@xxxxxxxxxxxxxxxxxxxxxxxx> writes:
> 
> That's a 2SD2539 generic which I have for $6.75.
> Jason Martin
> Excel Distributing Inc.
> 1819 Mentor Ave.
> Cincinnati, Ohio 45212
> 513-531-3989
> 800-733-3329
> JMartin@xxxxxxxxxxxxxxxxxxxxxxxx
> 
> ----- Original Message -----
> From: bob <bob_whigt@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, September 25, 2001 10:33 PM
> Subject: [TechAssist] Re: Help-mag.PTV775-Ah01 low b+
> 
> 
> >
> > Hello guys
> > Found Q802 shorted # D2539 i cant cross,any generics for it?I 
> thank it is
> a
> > high speed switch the location is hor- left side of flyback on the 
> long
> > heatsink ,left side of a smaller npn.Any one seen this trans. 
> short before
> > on a PTV775.I beginning to thank i might find out that the h.v. 
> spitter
> took
> > it out.Thanks for the help...........Have a great day ........bob
> > ELECTRON WORLD
> > GUTHRIE   KY
> > ----- Original Message -----
> > From: Damon <damon101@xxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Monday, September 24, 2001 7:51 PM
> > Subject: [TechAssist] Re: Help-mag.PTV775-Ah01 low b+
> >
> >
> > >
> > > Hey Bob, take a serious look at Ptv775-1.jpg. I think it might 
> be that
> > > diode.
> > >
> > > Damon
> > > ----- Original Message -----
> > > From: "bob" <bob_whigt@xxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Sunday, September 23, 2001 1:29 PM
> > > Subject: [TechAssist] Re: Help-mag.PTV775-Ah01 low b+
> > >
> > >
> > > >
> > > > Thank you for the reply damon,this chassis is new to me,anyone 
> have
> > print
> > > of
> > > > p.s.?I will definitely post the fix on this one.Have a great 
> day
> > > > ................bob
> > > > ELECTRON WORLD
> > > > GUTHRIE   KY
> > > >
> > > > ----- Original Message -----
> > > > From: Damon <damon101@xxxxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Saturday, September 22, 2001 7:08 AM
> > > > Subject: [TechAssist] Re: Help-mag.PTV775-Ah01 low b+
> > > >
> > > >
> > > > >
> > > > > About all I can say is : Check the power supply
> > > > >
> > > > > I think I've seen one dead PTV775 in 3-5 years.
> > > > > Actually, I think the B+ diode opens on some of these units, 
> and
> > another
> > > > > diode tucked in "real close" to the IHVT has been known to 
> short. I
> > wish
> > > I
> > > > > could give you location numbers, but this is a "mind e-mail 
> file"
> with
> > a
> > > > > visual attachment. Good luck and let us know what you find.
> > > > > ----- Original Message -----
> > > > > From: "bob" <bob_whigt@xxxxxxxxxxx>
> > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > Sent: Friday, September 21, 2001 5:11 PM
> > > > > Subject: [TechAssist] Help-mag.PTV775-Ah01 low b+
> > > > >
> > > > >
> > > > > >
> > > > > > Hey guys
> > > > > > Customer said it pop, when the set went off,undo h.v. 
> block no
> > > > > highvolt,when
> > > > > > press power led is dim only for a sec. then goes off 
> .Collecter
> hot
> > > > volts
> > > > > is
> > > > > > only 15v.Pulled hot it is ok.checked around chopper with no
> luck.Any
> > > > help
> > > > > > data would be appreciated.   Thanks in Advance........bob
> > > > > > Mag.7P5433 W101
> > > > > >          PTV775-AH01
> > > > > >       ELECTRON WORLD
> > > > > >       GUTHRIE KY
> > > > > >        270-466-3807
> > > > > > Help make your TechAssist online repair tips
> > > > > > database better!  Submit your fixes here:
> > > > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > > > To unsubscribe write to:
> > > > > > techassist-request@xxxxxxxxxxxxx
> > > > > > with  unsubscribe  in the subject line.
> > > > > >
> > > > >
> > > > > Help make your TechAssist online repair tips
> > > > > database better!  Submit your fixes here:
> > > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > > To unsubscribe write to:
> > > > > techassist-request@xxxxxxxxxxxxx
> > > > > with  unsubscribe  in the subject line.
> > > > >
> > > > Help make your TechAssist online repair tips
> > > > database better!  Submit your fixes here:
> > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with  unsubscribe  in the subject line.
> > > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better!  Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with  unsubscribe  in the subject line.
> > >
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
> 
> Help make your TechAssist online repair tips 
> database better!  Submit your fixes here: 
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx 
> with  unsubscribe  in the subject line.

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: