[TechAssist] Re: Help on Zenith Z32X31D

It is a MUST that you use original Zenith STR53041"s if you use any generic
they will not work. 221-23 if I remember right.

Shaun
Advanced Electronics
Fort Morgan, Co 80701

----- Original Message ----- 
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, December 31, 2003 10:43 AM
Subject: [TechAssist] Re: Help on Zenith Z32X31D


> Once got 5 bad regulators from a distributor. All five would not regulate
> right. called distributor and they sent me 5 more from different batch and
> problem was solved. These were the STR53041's.
> Al Marquardt
> ampm@xxxxxxx
> Al Marquardt Electronic Repair
> 206 W Main
> Girardville Pa. 17935
> ----- Original Message ----- 
> From: "Bob@Bobs tv" <woodman1@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, December 31, 2003 12:09 PM
> Subject: [TechAssist] Re: Help on Zenith Z32X31D
>
>
> > Roy,
> >       Did you replace any other components? Did you use a generic
> regulator?
> > Components that should be replaced with this repair..
> > ICX3431  223-28
> > QX3401   121-1348
> > CX3416    100/25 replace with at least 50V
> > CX3413     22/63
> > I would use OEM regulator, as its running all the time set is plugged
in..
> > I have found with some generic regulators {SK} they will blow when first
> > turned on..Serviced many of these sets Y Z A B lines and and only one
bad
> > fly and no picture tubes, and i'm sure some will dispute...
> > Hope this helps
> > Bob,
> >
> > Bobs TV   Worcester, ma
> >
> > woodman1@xxxxxxxx
> >
> > Main  508-853-1482
> > Fax    508-853-1480
> > ----- Original Message ----- 
> > From: <Royal19960@xxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, December 31, 2003 11:47 AM
> > Subject: [TechAssist] Help on Zenith Z32X31D
> >
> >
> > > Hi all
> > > Hope you all have a great new year.
> > > I have problems with a Zenith Z32X31D tv. I have replaced the
regulator
> 3
> > > times now. It works for anywhere from 2 days to a week and the
regulatos
> > goes
> > > out. I'm not sure but I think it might do it on turn on. It seems that
> it
> > will
> > > work untill I shut it off for the night. When I come into the shop in
> the
> > > morning it will be dead with a bad regulator. Any ideas?
> > > Thanks in advance
> > > Roy
> > > Roy Adams
> > > Bonded TV Service
> > > 5158 W Forest Home Ave
> > > Milwaukee, WI 53219
> > > 414-541-9111
> > > www.Bondedtv.com
> > > we have thousands of tubes on the site
> > > Webhosting from only 4.95 a month at Bondedhost.com
> > >
> > >
> > >
> >
>
****************************************************************************
> > *
> > > Lost Password:
> > > http://www.tech-assist.org  and select "Login Problems?".
> > > Email Archives:
> > > http://www.freelists.org/archives/techassist/
> >
> >
> >
>
****************************************************************************
> *
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > http://www.freelists.org/archives/techassist/
> >
> >
>
>
>
****************************************************************************
*
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/

*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: